Window Replacement Cost in Johns Creek, GA (2026)
The short answer
You probably live in a two-story built somewhere between 1985 and 2000, and the builder's original wood windows are now 25 to 40 years old. A few are fogged. A sill or two goes soft when you press it with a thumb. You'd like to know what replacing all of them costs before somebody tells you in your own kitchen.
For a typical Johns Creek house (about 28 windows), whole-house vinyl replacement usually lands between $25,000 and $45,000 installed. That's with removal and haul-away included. If rot pushes a lot of openings to full-frame replacement, or you want wood, clad or fiberglass, expect $45,000 to $75,000 and up. Per window, standard vinyl runs roughly $800 to $1,500 installed.
Same numbers apply if you're here for a different reason: getting the house ready to list, fixing a few fogged units, or answering an HOA letter about that rotten sill on the front. The sections below cover all of those, including when you don't need new windows at all.
Why the national averages look so cheap
You've probably seen "window replacement costs $5,000 to $15,000" somewhere. That number isn't wrong. It's for somebody else's house. Most national project averages assume 8 to 12 windows, and the Atlanta-area averages floating around are built on smaller intown homes.
Johns Creek is not that. About 63% of homes here have four or more bedrooms and 71% were built between 1970 and 1999, according to NeighborhoodScout's housing data. A two-story 4 to 5 bedroom house of that era typically has 25 to 35 openings, plus a tall foyer or great-room window or two. Multiply even a modest per-window price by 28 and the total stops looking like a national average very quickly.
For a sense of scale: the 2025 Cost vs Value report puts a ten-window upscale vinyl job in Atlanta at $21,631. Ten windows. A 2025 project in neighboring Alpharetta replacing 20-plus vinyl windows, with some rot repair and an entry door, was listed in the $25,000 to $50,000 range. That's the neighborhood your total lives in.
The good news, such as it is: Atlanta-area construction labor runs about 10% below the national average ($27.58 an hour versus $30.73, per BLS), and Johns Creek's sales tax is 7.75% (Fulton outside the City of Atlanta, per the state's rate chart), a bit lower than the Atlanta rate some cost pages use. Neither saves you much. Window count is what sets the total.
Insert or full-frame: the sills decide
This is the biggest price lever on your job, and it's mostly decided by the condition of wood you can't fully see yet.
Insert (pocket) replacement slides a new vinyl unit into your existing wood frame. Interior trim stays. The brick returns on the front stay. It's the cheapest and fastest version, roughly $800 to $1,500 per standard opening here, and on a sound house it's the right call. You lose a little glass area to the new frame inside the old one. Most people stop noticing within a week.
Full-frame replacement strips the window down to the rough opening: old frame, sill, brickmold, everything. Then new unit, new flashing, new exterior trim, and often new interior casing. It's the only honest fix when the frame or sill has rotted, and it plausibly adds about $300 to $600 or more per affected opening, putting those windows around $1,100 to $2,000 each. A whole house done this way runs roughly $32,000 to $55,000 in vinyl.
Here's why it matters so much in Johns Creek. The 1985 to 2000 builder windows in these houses were mostly primed wood or early clad wood, and wood windows from that era rotted often enough to draw national class actions. Add Georgia humidity and a shaded north side, and soft bottom sills are common. Consumer Reports puts it plainly: full-frame "is the most costly" option, and it's the one you need when the frame is rotten.
On most houses here the answer is both. The brick front often takes inserts nicely, while the siding elevations on the sides and back are where the rot hides, so they go full-frame. A mixed job like that usually runs $28,000 to $48,000. If a third of your 28 openings need full-frame, that's roughly $3,000 to $6,000 on top of an all-insert price.
For example, based on our estimate engine, a 1994 brick-front two-story with 28 original wood double-hungs (one arched transom over the foyer, several fogged, a few soft sills) going to white vinyl with grids, keeping interior trim where possible, comes out to about $19,000 to $32,000.
The catch with rot: a lot of it only shows up once the old window is out. Ask for a per-opening price for full-frame conversion or sill repair, written into the contract before work starts. Then a surprise is a known number instead of a negotiation with your siding off.
Two more things that can widen the job on some 1990s houses:
- Hardboard siding. If your sides and back are an old pressed-board siding, rot around windows can spread into the siding itself. Full-frame work there can turn into a small siding repair. Ask how they'll handle it if they find it.
- EIFS (synthetic stucco). EIFS started in Atlanta around 1980 and ended up on a big share of Southeast homes built through the early 1990s, with a well-known history of water problems around windows. On an EIFS house, pulling windows can uncover hidden water damage. You want an installer who has done EIFS before, and possibly moisture testing first. It's a minority of homes, but if yours is one, price it in.
Vinyl, wood or fiberglass in Georgia humidity
Vinyl
Pella's 2026 national averages put installed vinyl at $800 to $1,600 per window, and Johns Creek jobs sit comfortably inside that for standard double-hungs. Upscale specs (simulated divided lites, custom exterior color) push toward the $2,100-per-window figure in the Atlanta Cost vs Value data. Dark or custom exterior colors cost extra.
Vinyl doesn't rot, which is exactly the problem you're replacing, so it suits humid elevations and shaded backs. The weak points are the glass seals over time. A decent vinyl window in this climate is a solid 20-plus-year product in most installers' experience.
When it's wrong: your HOA wants matching wood or clad, you have big arch-tops or tall picture units where a chunky vinyl frame looks clumsy, or you're in a high-end house where buyers will notice.
Wood and aluminum-clad wood
Expect roughly $1,100 to $2,200 or more per window, with the Atlanta Cost vs Value wood figure at about $2,681 per window for an upscale spec. A whole-house premium job, wood, clad or fiberglass, typically runs $40,000 to $75,000 and up, with in-home-sales showroom pricing at the top.
Your current windows are the cautionary tale here: primed wood failing at the sills at 25 to 40 years. Aluminum-clad exteriors last much longer than bare primed wood, as long as they're flashed properly. Custom sizes and shapes often take longer to arrive.
When it's wrong: shaded, wet elevations with nobody planning to keep up the paint inside, or any job where the budget is tight. You'd be buying the same problem with a nicer brochure.
Fiberglass and composite
Similar money to wood, about $1,100 to $2,200 per window. It won't rot, stays stable in summer heat, takes paint and dark colors well, and can be a good answer when an HOA frowns on vinyl but you don't want wood maintenance.
When it's wrong: when it's sold through a long in-home presentation with a big list price and a "today only" discount. The material is fine. The markup is the problem.
That big window over the foyer
Most Johns Creek two-stories have at least one: the arch-top transom over the front door, a half-round, or a tall picture window lighting the great room. These cost more for two reasons. They're custom shapes, which often run 2 to 4 times the price of a standard double-hung. And someone has to reach them, which can mean scaffolding or a lift and a crew of two or three, typically adding a few hundred dollars per affected opening.
Neither is a reason to skip them, but it's why one window can be a surprisingly big line on the quote. Ask to see the specialty units priced separately so you know what you're paying for.
When you only need new glass
If your house is newer, your frames are solid and only a handful of units are fogged, you may not need new windows at all. Replacing just the sealed glass unit typically runs $300 to $700 per unit (small ones from about $250, more for big or upstairs units), per a home inspector's 2026 rundown. There are glass repair outfits working in Johns Creek that do exactly this.
Check the manufacturer's seal warranty first. You might be covered. What glass-only won't fix: rotted sashes or soft sills. If your thumb goes into the wood, that's a window problem, not a glass problem.
No permit, but probably an HOA form
Johns Creek doesn't require a permit for same-size, same-location window replacement. The city's permit page lists it under "no permit." That's one less fee and one less wait than some Atlanta-focused pages warn about.
It changes if you're altering the structure: enlarging an opening, adding egress, cutting a new header or turning a window into a door. Then the city's fee schedule applies, with a $175 minimum permit fee plus at least $125 for plan review, so plan on roughly $300 or more in city fees, plus any engineering for a header.
The flip side of no permit: nobody independent checks the flashing. No inspector is coming. The installer's own care is the whole quality control, which is one more reason to ask exactly how they flash and seal each opening.
Your HOA is the paperwork you can't skip. Most Johns Creek subdivisions require architectural approval before exterior changes. St Ives says all exterior modifications need an application, usually answered in under a week. Haydens Walk's guidelines say windows "should be of matching material and complimentary colors," and the committee has 15 days to act. Budget a week or two for approval before anything gets ordered, and read your covenants for "matching material" language. It can steer you toward clad or fiberglass, or a specific color and grid pattern, and away from the cheapest quote.
Why a 2025 quote is out of date
If you got a price last year and shelved it, it's stale for two reasons.
Prices went up. Major manufacturers raised prices in mid-2026: Pella 3 to 4% in July, one vinyl maker 4 to 6% in June, another about 7% in May citing new tariffs on aluminum, glass and paint. On a $35,000 job, 4 to 7% is roughly $1,400 to $2,500.
The tax credit is gone. The federal energy-efficiency credit that used to give you up to $600 a year for windows doesn't apply to anything installed after December 31, 2025, per the IRS. Georgia Power's 2026 home efficiency program doesn't list windows either. So for a 2026 job, what you pay is what it costs. If a salesperson or a web page mentions a window tax credit, it's out of date.
There is still a little money for the attic, if comfort is part of why you're doing this. Georgia Power's program pays 50% of attic insulation (up to $300 for electric homes, $200 for gas) if your existing insulation is below R-19, and 50% of air sealing (up to $400 electric, $300 gas) with before-and-after testing. A hot upstairs bedroom is often more attic than window. If the real complaint is the upstairs never cooling down, it's worth reading about HVAC replacement in Johns Creek too before you blame the glass.
The glass to ask for in Fulton County
Fulton County falls in ENERGY STAR's South-Central zone, which calls for a U-factor of 0.28 or lower and a solar heat gain coefficient of 0.23 or lower (ENERGY STAR's Fulton County page). In plain terms: you want glass that keeps out summer sun, not just winter cold.
In glass-maker speak, the common double-pane low-E coatings labeled 366, 340 or 452 meet South-Central. The 270 and 272 coatings, which installers sometimes quote as the default, don't. Any modern low-E window beats Georgia's code minimum, and nobody checks a no-permit replacement anyway, so this one is on you. Ask which coating is in the quote, by name. Ask what the upgrade costs if it isn't the low-SHGC one. On a heavily wooded lot where the windows barely see the sun, the payoff is smaller.
If you're replacing windows to sell
Windows don't pay for themselves at resale. In the Atlanta Cost vs Value data, vinyl replacement recoups about 71% of its cost and wood about 66%. What new windows buy you is a cleaner inspection report and fewer buyer objections, not a profit.
If you're listing soon and the windows are mostly fine, fixing the worst sills and fogged units may get you through inspection for far less than a whole-house job. If they're genuinely failing, buyers in this price range will notice, and you'll pay for it one way or another.
What to ask, and what should worry you
Prices for the same job vary more than you'd think. Checkbook's 2026 survey found the highest quote for the same job often ran several thousand dollars over the lowest, and companies selling the same brand can differ by $50 to $100 per window. On 28 windows, that's $1,400 to $2,800 for nothing different. Checkbook's findings are a good argument for getting at least three itemized quotes.
Ask every installer:
- What's the price per opening, and which openings are insert versus full-frame?
- What's the per-opening price if you find rot once the old window is out? Put it in writing.
- How do you flash and seal each opening, on brick and on siding?
- Which glass coating is this, and does it meet ENERGY STAR South-Central?
- How are the arch-top and second-story units priced, and how will you reach them?
- Does the price include interior casing, caulk and paint touch-up after full-frame work? Many contracts exclude it.
- Who handles disposal, and who submits the HOA application?
- What's the product warranty, and what's your labor warranty, separately?
- Are you licensed and insured for this work in Georgia? Ask for the paperwork.
Red flags in a quote:
- A big "percent off" offer. One national chain's Johns Creek page advertises 30 to 50% off, with fine print that excludes labor, requires a four-window minimum and pushes 17.99% APR financing. Percent off a list price is not a market price.
- "Today only" pricing after a two-hour presentation at your dining table.
- One lump sum for 28 windows with no per-opening breakdown and no rot allowance.
- A window tax credit mentioned anywhere. It ended for 2026 installs.
- A national-average price for a house that has three times the national-average number of windows. Either the scope is thin or the change orders are coming.
Get your estimate
Want a number for your own windows? Describe the job in the box below, add a photo if you have one, and you'll get a free estimate in 2-3 minutes. If it looks right, we'll find you a vetted local window installer for the work.
Common questions
Do I need a permit to replace windows in Johns Creek?
Not for a same-size, same-location replacement. Johns Creek lists it as no permit required. Enlarging an opening, adding a new header or converting a window to a door does need one, with city fees that typically start around $300.
Is there a tax credit for new windows in 2026?
No. The federal credit ended for windows installed after December 31, 2025, and Georgia Power's 2026 program doesn't cover windows. Attic insulation and air sealing still have Georgia Power rebates if your home qualifies.
Can I just fix the fogged windows instead of replacing them all?
Often, yes, if the frames and sashes are sound. Replacing the sealed glass unit typically runs $300 to $700 per window. Check your manufacturer's seal warranty first. It won't fix soft or rotted sills.
How long does whole-house window replacement take?
Ordering usually takes longest. Stock vinyl often arrives in 4 to 8 weeks, with wood, clad and special shapes taking longer, plus a week or two for HOA approval beforehand. The install itself is typically 2 to 4 days for about 25 to 30 insert windows, longer if many openings go full-frame.
Should I replace my windows before selling?
Only if they're genuinely failing. In the Atlanta Cost vs Value data, new windows recoup roughly two-thirds of their cost. Fixing the worst sills and fogged units is often enough to get through a buyer's inspection.
Get the number for your own job
A typical job is a starting point, not your job. Describe yours (a photo helps) and the same estimate engine prices it for Johns Creek in 2-3 minutes. Free, and nobody gets your number.
Sources (25)
- https://www.pella.com/ideas/windows/replacement-window-cost/
- https://www.jlconline.com/cost-vs-value/2025/south-atlantic/atlanta-ga
- https://www.jlconline.com/cost-vs-value/window-replacement-vinyl-upscale
- https://www.bls.gov/regions/southeast/news-release/2025/occupationalemploymentandwages_atlanta_20250425.htm
- https://www.neighborhoodscout.com/ga/johns-creek/real-estate
- https://www.houzz.com/hznb/projects/20-window-replacements-using-mi-1500-series-vinyl-replacement-windows-pj-vj~7774514
- https://johnscreekga.gov/departments/community-development/building-permitting/do-i-need-a-permit
- https://johnscreekga.gov/app/uploads/2024/07/community-development-fee-schedule.pdf
- https://www.consumerreports.org/home-garden/replacement-windows/buying-guide
- https://www.checkbook.org/national/window-installers/articles/Finding-the-Best-Window-Installers-5790
- https://www.windownation.com/locations/georgia/johns-creek/
- https://pmi.cincwebaxis.com/stives/faq
- https://haydens-walk.squarespace.com/s/ACC-GuidelinesHaydensWalkHOA122017.pdf
- https://www.irs.gov/newsroom/faqs-for-modification-of-sections-25C-25D-25E-30C-30D-45L-45W-and-179D-under-public-law-119-21-139-stat-72-july-4-2025-commonly-known-as-the-one-big-beautiful-bill-obbb
- https://www.georgiapower.com/content/dam/georgia-power/pdfs/programs/heip/HEIP_Preconditions_Requirements_2026.pdf
- https://www.abcsupply.com/wp-content/uploads/price-increase-announcements/Pella%20Windows%207.1.26.pdf
- https://www.abcsupply.com/wp-content/uploads/price-increase-announcements/Westlake%20Windows%206.1.26.pdf
- https://www.abcsupply.com/wp-content/uploads/price-increase-announcements/ES%20Windows%20Price%20Increase%205.4.26.pdf
- https://www.energystar.gov/products/building_products/residential_windows_doors_and_skylights/climate_zone/georgia/fulton?product=windows
- https://www.cardinalcorp.com/technology/sustainability/us-energy-star-7-glass-guidance/
- https://www.southface.org/wp-content/uploads/2019/09/GA-2020-Residential-Field-Guide.pdf
- https://structuretech.com/repairing-a-window-with-fogged-glass/
- https://dor.georgia.gov/document/document/httpsdorgeorgiagovdocumentdocumentgeneral-rate-chart-effective-october-1-2026/download
- https://fox5atlanta.com/news/synthetic-stucco-perception-still-hurts
- https://topclassactions.com/lawsuit-settlements/lawsuit-news/pella-class-action-says-windows-prone-premature-wood-rot
Researched for Johns Creek, GA · Updated November 20, 2026 · How these guides are made
Prices are researched local ranges, not quotes. The contractor who sees your job sets your actual price. More Johns Creek cost guides