HVAC Replacement Cost in Johns Creek, GA (2026)

A gas furnace and AC replacement for one system in a Johns Creek house typically runs $9,000 to $14,000 installed, for mid-tier equipment and ducts that get reused. A premium variable-speed system with humidity control runs about $13,500 to $18,500. Replace both systems in a two-system house at once and you are looking at roughly $18,000 to $30,000.

Most people reading this have the same morning. The upstairs won't cool, a technician says the unit is 20-plus years old, and the word "replace" came up. Fair. In a town where the median home was built in 1995, the original equipment has mostly aged out. The same guide works if you have real damage (a lightning hit, a water-logged air handler), a system that still runs but is on borrowed time, or a house you are buying or selling and an inspector who flagged the HVAC.

These ranges are installed prices before any rebate, for a house around 3,000 square feet. They come from installer-published pricing in north Georgia, not from a pile of Johns Creek invoices, so treat them as the middle of the road and let a real quote move you from there. For example, based on our estimate engine, replacing the upstairs AC and gas furnace (both in the attic, reusing the existing ductwork) in a 3,200 square foot, 1998 two-story runs about $8,500 to $14,000.

Why "a replacement" is often two systems

Look at what Johns Creek is made of. Most of the housing sits in 1980 to 2009 subdivisions, the median home was built in 1995, and big two-story houses commonly have a separate system for each floor. Every price guide you will find online prices one system. Your house may have two.

That matters in two ways. First, when one fails the other is usually the same age and not far behind. Second, the decision in front of you is not "what does a system cost" but "do I replace the one that died or both?" Replacing only the dead one is the cheaper day. Replacing both can save you a second visit and a second trip through the same summer-or-winter emergency, and an installer will sometimes price that more kindly than two separate jobs (ask, don't assume). If the surviving system is more than about 15 years old, get both prices on paper before you decide.

What moves the price on a Johns Creek house

Ducts are the biggest swing. Reusing existing ducts is the baseline for every number above. Replacing old flex duct in the attic adds roughly $5,000 to $9,000 or more, which can push a single-system job toward $20,000. Twenty-five-year-old flex duct that sags, kinks or leaks is a real problem, and a new system on bad ducts will never perform like the brochure. A good contractor looks at them and tells you what they see. A bad quote says nothing and quietly reuses them.

Attic work costs more. Many 1990s two-story homes keep the upstairs furnace and air handler in an attic reached by a pull-down or scuttle. Carrying a furnace and coil through a tight hatch in July heat takes longer and takes more people. Labor is often 30 to 50 percent of the total install, and attic location, number of floors and a second system are what push it toward the high end.

The tier of equipment. Standard single-stage equipment sits in the $9,000 to $14,000 range. Variable-speed, humidity-controlling equipment runs $13,500 to $18,500. Georgia humidity makes the better dehumidification real, not imaginary, but for many houses the middle tier does the job. Ask what the extra money buys in your house specifically.

Size. A 4-ton system is common for a house this size. Sizing should come from a load calculation, not the size of the old unit. A contractor who just matches the old tonnage may be repeating a 1998 guess.

Furnace and AC, heat pump, dual fuel, or mini split

Gas furnace plus AC: $9,000 to $14,000 per system. The default for a reason: most homes here already have gas service and a gas furnace, and the ductwork is sized around it. It is the wrong choice if the home has no gas, or if the furnace is healthy and only the AC failed and is under about 10 years old (a mismatched pairing can cost you the efficiency you paid for, so ask).

Heat pump plus air handler: $9,500 to $15,000. In a north Georgia installer's example the premium over furnace plus AC is only about $1,000 to $1,500, smaller than most guides imply. Winters here are mild, so a heat pump heats most of the year without trouble. The savings pitch (roughly $3,000 to $6,000 over 15 years) is the installer's own estimate, so ask for the gas and electric assumptions behind it. It is the wrong choice if you are counting on a rebate. See the next section.

Dual fuel: roughly $12,000 to $17,000. A heat pump does most of the heating and the gas furnace takes over on the coldest nights. Contractors mostly pitch it for gas-served homes of 3,500 square feet and up. You pay for two heating systems and maintain both, so it is the wrong choice on a tight budget.

Ductless mini split: $4,500 to $9,000 per zone. Great for a bonus room, finished basement or sunroom that the ducts never served well. It is the wrong choice for cooling a whole house, since per-zone pricing costs more than a ducted system somewhere past two or three zones.

The rebate that mostly is not for gas homes

Heat pump ads in Georgia love the word "rebate." Read the fine print. Under Georgia Power's 2026 program rules, the furnace-to-heat-pump rebate (50 percent of cost, up to $1,500) requires that the existing heating be an electric furnace. A gas-heated home switching to a heat pump gets $0 from that line. Applications are due within 60 days of installation, and rebates cap at $2,500 per customer per year.

Gas homes are not shut out of everything. Duct sealing and a comfort bundle exist for gas-heated homes, and the amounts vary by document: the rules PDF says up to $500 for duct work and up to $1,400 for the bundle, while the program page shows somewhat higher numbers and a mini split rebate up to $500. Treat all of those as "up to" and confirm with Georgia Power before you count on them.

The federal heat pump credit is also gone. The IRS says the 25C credit covers property placed in service before December 31, 2025. Some 2026 installer pages still quote a net price "after the $2,000 credit." That is a stale number. A heat pump installed now costs up to $2,000 more, net, than those pages suggest.

The permit is about $75 and it is required

The city's permit page lists replacement of heating and air conditioning units as permit required, and warns that unpermitted work can bring a stop work order, fines and other penalties. Permits can be issued to a homeowner, agent or licensed contractor, and in practice your installer should pull it.

The cost is small. Stand-alone trade permits run $6.50 per $1,000 of valuation with a $75 minimum, which works out to roughly $75 to $90 on a typical job. Under 1 percent of the bill. The real cost is skipping it: a house with an unpermitted system is a headache at sale time. Ask if the permit is in the quote. If a contractor says you don't need one, the city's own page says otherwise. Questions go to Community Development at 678-512-3250.

Refrigerant and efficiency labels, decoded

New units use A2L refrigerant (R-454B or R-32). A federal rule published in May 2026 removed the installation deadline for older R-410A systems, as long as the equipment was made or imported before January 1, 2025. So you may be offered either. Brand-new equipment is A2L. Expect a modest premium for it and some leftover R-410A stock, and ask which one your quote is for, since it affects future repairs.

SEER2 floors. Georgia sits in the federal Southeast region, where split AC under about 3.5 tons must be at least 14.3 SEER2, and larger units 13.8 SEER2, per Lennox's regional standards sheet. That is a federal rule, not a Georgia one. For a typical 4-ton replacement, a quote that says "14.3 is required" is imprecise. Pay for a higher number only if the savings and comfort make sense for your house.

What to ask, and what to watch for in a quote

Ask for the quote itemized and in writing. Then:

  • Is this one system or both? And what is the price of the other option?
  • What are the ducts doing? Ask them to look in the attic and tell you the condition. Get the duct add-on priced separately.
  • Is the permit included, and who pulls it?
  • What was the load calculation, and why this tonnage?
  • What refrigerant and what SEER2 is the unit, and what are the model numbers of the furnace, coil and condenser?
  • What does the warranty cover for parts and labor, and who registers it?
  • Is the thermostat included? And how long is the job? A like-for-like single-system swap is typically a day, a tight attic can stretch it.

Red flags: a price with no model numbers, "no permit needed," pressure to sign today, a rebate promised without a program name, a heat pump rebate promised to a gas-heated house, a quote that never mentions the ducts, and a number that is far below the others without an explanation. Low is not a bargain if it skips the permit or the ducts. You want the best work per dollar, the one you will not pay for twice.

A note on timing: summer is the busy season, and cooling failures bring long waits and rushed decisions. Early November is a quieter stretch for cooling, but heating failures start showing up. If your system is limping, get quotes before it quits.

Get your estimate

Want a number for your own house? Describe the job in the box below, add a photo of the unit if you have one, and you'll get a free estimate in 2-3 minutes. If it looks right, we'll find you a vetted local HVAC contractor for the work.

Common questions

How much does it cost to replace just the AC in Johns Creek?

It depends on whether the furnace or air handler is matched to it. A full gas furnace plus AC system is typically $9,000 to $14,000. Replacing only the AC is cheaper, but if the indoor coil is old, a mismatched pairing can undercut the efficiency you paid for, so ask whether the coil should be replaced too.

Should I replace both systems if only one died?

Not automatically. If the other system is under about 10 years old, replacing only the failed one is usually the practical choice. If it is 15-plus years old, ask for a price on both. It can make the second system cheaper per unit, and you avoid a second emergency.

Can I get a rebate for a heat pump from Georgia Power?

Only in some cases. The $1,500 furnace-to-heat-pump rebate requires an existing electric furnace, so a gas-heated home generally does not qualify. Check Georgia Power's current rules before you count on any amount, and remember applications are due within 60 days of installation.

Do I need a permit for an HVAC replacement in Johns Creek?

Yes. The city lists replacement of heating and air conditioning units as permit required. The fee is typically about $75 to $90, and your contractor should pull it.

Will my HOA need to approve a new AC?

A like-for-like swap on the same pad usually does not, but moving the condenser or changing its screening often does. Check your covenants or ask your HOA how long review takes before you sign.

Get the number for your own job

A typical job is a starting point, not your job. Describe yours (a photo helps) and the same estimate engine prices it for Johns Creek in 2-3 minutes. Free, and nobody gets your number.

Sources (11)

Researched for Johns Creek, GA · Updated November 10, 2026 · Reviewed by Ralph Cockburn on November 16, 2026 · How these guides are made

Prices are researched local ranges, not quotes. The contractor who sees your job sets your actual price. More Johns Creek cost guides