HVAC Replacement Cost in Madison, AL (2026 Prices)
The short answer
Replacing one standard heat pump system in a Madison home (about 3 tons, new matched air handler, existing ducts reused) typically runs $8,000 to $12,000 installed. A higher-efficiency two-stage or variable-speed heat pump runs about $11,000 to $16,000. AC plus a gas furnace lands around $8,500 to $13,000. If your house has two systems and you do both at once, think $16,000 to $26,000.
Odds are you're here because the unit in the hall closet or out by the patio just quit, probably in a house built sometime between 1990 and 2010, probably on its original equipment. Maybe it's the downstairs one and the upstairs attic unit is the same age and watching nervously. Or you're buying or selling and the inspector wrote "near end of life" in the report. Or the power bill finally got rude. The numbers below work for all of those.
Why so many Madison systems are dying at once
Madison went from about 15,000 people in 1990 to about 43,000 in 2010, per the Census figures on the city's Wikipedia page. That is a lot of houses built in a hurry, and roughly half of the homes here today went up in that window. Their original systems are now somewhere between 16 and 36 years old. A heat pump in this climate works year round (cooling all summer, heating through real January cold snaps), so it typically gives you something like 12 to 17 years. Plenty of them have been on borrowed time for a while.
That has two practical effects. First, a lot of the systems failing now are still on R-22, the old refrigerant that's no longer made. Second, a lot of two-story homes from that era have two systems installed the same week, so they tend to wear out within a few years of each other. Both of those shape your quote, so they get their own sections.
It's a whole system now, not just the box outside
Since 2025, new residential systems use A2L refrigerants (R-454B or R-32) instead of R-410A. That means a replacement today is a matched outdoor unit plus a new indoor coil or air handler, not a condenser-only swap. If your old system is R-22, there was never a halfway option anyway: the indoor and outdoor halves have to match the refrigerant, so a failed R-22 unit means a full matched replacement.
It also costs more. Manufacturers announced the new equipment at roughly 10% above R-410A, with one saying 15 to 20% over two years (ACHR News has the details). If a neighbor, a forum post or an old estimate quoted you a price from 2023 or 2024, add about 10 to 20%. That's not your contractor padding the job. That's the box.
The 2025 refrigerant shortage you may have read about (cylinders over $500, a 42% surcharge on R-454B) largely cleared by late summer 2025, and equipment now ships pre-charged for about 30 feet of line. Where it still matters: in a two-story house where the upstairs unit's line runs from the attic down to the pad, the run can be longer than the factory charge covers, so expect a line item for added refrigerant on those jobs.
Two systems, one house
Many two-story Madison homes have one system for downstairs (often a closet air handler) and one in the attic for upstairs. When one dies, you have a real choice to make, and nobody should rush you through it.
Replacing both together typically runs $16,000 to $26,000. That's roughly two single jobs minus a bit, because one crew, one trip and one permit visit cover both. Replacing just the dead one keeps the cost to a single system now and gives you time to save for the other.
How to decide, from the trade side:
- If the surviving unit is the same age and also R-22, get a price for both and a price for one. If the gap is meaningful, doing both is often worth it. If it isn't, there's no shame in running the old one until it quits.
- If the surviving unit is much newer or already on R-410A, replace the dead one and leave the other alone. A working system is not a problem to solve.
- If the attic unit is the one that died, expect that job to cost more than the closet one. Attic work is slower, hotter and harder, and access sometimes needs fixing (more on that below).
What each option costs in Madison
All prices below are for one system of about 3 tons with existing ducts reused, installed, including the permit and haul-away. National averages you'll see online often look scarier (one national dataset puts a whole-home heat pump median near $19,500), but those include colder, pricier regions and full electrification projects. A straight swap here usually comes in well under that.
Standard heat pump (15-16 SEER2): $8,000 to $12,000
This is the most common job in Madison. Electric power here comes from TVA through Huntsville Utilities or Athens Utilities, and a lot of homes are all-electric: a heat pump outside, an air handler with backup electric strip heat inside. A single-stage 15-16 SEER2 heat pump does the job fine and earns a $500 TVA rebate if installed by the right contractor. For example, based on our estimate engine, swapping the failed original downstairs 3-ton heat pump in a 2001 two-story Madison house for a matched 15-16 SEER2 unit and new closet air handler, ducts reused and the upstairs attic system left alone, runs about $5,800 to $10,200.
When it's the wrong choice: if your house has gas and you like the feel of furnace heat during a hard freeze, look at dual fuel instead.
High-efficiency heat pump (17+ SEER2, two-stage or variable-speed): $11,000 to $16,000
These run longer at lower speed, which matters in a humid summer: steadier temperatures and better moisture removal. They earn the bigger $800 TVA rebate. But the step up from 15 to 17 SEER2 often costs $1,500 to $4,000 more and the rebate only grows by $300, so the rebate rarely pays for the upgrade by itself. Buy it for comfort and lower bills, not for the rebate.
When it's the wrong choice: if you're selling within a couple of years, or if your ducts are leaky enough that the efficiency gains leak into the attic with the air.
AC plus gas furnace: $8,500 to $13,000
Common where natural gas is on the street. Furnaces often last 20 years or more; the AC half wears like a heat pump. There's no TVA heat pump rebate on this setup (central AC qualifies for $200 to $400 instead). If the furnace is in the attic, most installers keep it at 80% efficiency, because moving to a 90%+ unit means new PVC venting and condensate routing in a space that freezes. If your house uses propane rather than natural gas, the installer needs a separate LP gas certification in Alabama, so ask.
When it's the wrong choice: if there's no gas main (common in a number of newer subdivisions, so check your utility bill or meter), or if you want the TVA rebate.
Dual fuel (heat pump plus gas furnace): $10,000 to $15,000
The middle path: the heat pump handles most of the year, and the furnace takes over in the cold snaps. It counts as a heat pump for the TVA $500 or $800 rebate. Gas in the Madison County part of town typically comes from Huntsville Utilities, and on the Limestone County side Athens Utilities sells gas, but availability goes street by street.
When it's the wrong choice: no gas available, or the winter savings don't cover the extra cost. Ask the contractor to show you that comparison in numbers.
Ductless mini split, single zone: $3,000 to $6,000
Not a whole-house replacement in a ducted home. It's the fix for the bonus room over the garage, the sunroom or the shop that never gets comfortable. A 17+ SEER2 mini split earns the $800 TVA rebate. Sometimes it's the smarter fix when the complaint is "upstairs is miserable" rather than "the system is dead." Multi-zone setups run much higher, roughly $8,000 to $16,000.
The rebate is TVA, not Alabama Power
Madison is TVA territory. The only real money back left for most households is TVA EnergyRight, paid through your local power company: $500 for a 15+ SEER2 heat pump, $800 at 17+ SEER2, $800 for a 17+ SEER2 mini split, and up to $400 for central AC, per the EnergyRight rebate page. Duct sealing or replacement has also been listed at $300.
The catch, and it's a real one: the installer must be a member of TVA's Quality Contractor Network, and the contractor files the claim. A non-network installer with a lower number on paper quietly costs you $500 to $800. Ask before you sign, not after.
Two things you may read elsewhere that don't apply here:
- Alabama Power rebates. Some cost pages mention them. Madison isn't served by Alabama Power, so they don't help you.
- The federal tax credit. The 25C heat pump credit ended for systems installed after December 31, 2025.
Alabama's income-qualified federal rebate program (planned at up to $8,000 for a heat pump for households under 80% of area median income) had not launched as of mid-2026. If that might be you, ask your power company or ADECA whether it's open yet.
Extras that push a quote higher
The ranges above assume your ducts, wiring and access are fine. When they aren't, here's what tends to get added. Statewide figures, so read them as direction rather than gospel:
- Duct sealing: about $1,500 to $3,500. Worth asking about if some rooms never cool or the attic feels suspiciously air-conditioned.
- Partial duct replacement: about $2,000 to $5,000. Full replacement: about $5,000 to $12,000. A good contractor will show you why (crushed flex, disconnected runs, rodent damage), not just write a number.
- Line set replacement. Sometimes the old copper can be cleaned, pressure-tested and reused; sometimes it's the wrong size or in bad shape. Typically a few hundred dollars to over $1,000 depending on length and access. Ask which they're doing and why.
- Attic access and platform work. Upstairs systems need a safe path, a service platform and usually a secondary drain pan with a float switch. If yours is missing any of that, or the new air handler won't fit through the old opening, expect some hundreds of dollars more.
- Electrical. Swapping a heat pump for a heat pump usually reuses the existing strip-heat circuit. Switching from gas heat to a heat pump may need a new breaker and wiring.
Permits, and the contractor who offers to skip one
The City of Madison requires a permit for all mechanical work, including the Limestone County part of the city, and the application includes a signed contract stating the price (city permitting page). If you have a Madison mailing address but live outside city limits in Madison County, the county requires a permit for a mechanical change-out "regardless of cost," with fees based on job cost and a $150 minimum on its fee schedule. The city fee is typically a modest line item, usually a couple hundred dollars or less. Your contractor normally pulls it, and it rarely holds up an emergency swap.
A contractor offering to skip the permit to save you money is a red flag, not a favor. It skips the inspection, it puts a certified contractor crosswise with the state HVAC board (which can discipline contractors who don't pull required permits, per the HACR Board newsletter), and permit-free work tends to come from installers who aren't in TVA's network either. So you lose the rebate on top of everything else.
What to ask, and red flags in a quote
Ask every contractor:
- Are you certified with the Alabama HACR Board, and what's the number? You can look it up.
- Are you in TVA's Quality Contractor Network, and will you file the rebate?
- What's the AHRI certificate number for this matched system? It proves the indoor and outdoor parts are rated together, and the rebate depends on that rating.
- Is this the same size as what I have, and how did you decide? For a like-for-like swap, matching is often fine. If they're changing the size, ask whether they ran a load calculation (Manual J). Oversizing in this humidity leaves a house cold and clammy.
- Are you reusing my line set or replacing it?
- What's included: permit, haul-away, new pad, drain pan, float switch, thermostat, startup check?
- If I have two systems, what's the price for one and for both?
Red flags:
- "We'll just replace the outside unit" on an R-22 system. That doesn't work with new equipment.
- No permit, or "permit's extra if you want it."
- No model numbers or SEER2 rating on the quote. You can't compare what you can't see.
- A rebate promise from a contractor who isn't in the TVA network.
- Pressure to sign today because a "deal" ends tonight. Equipment pricing doesn't change by the hour.
- Duct replacement with no explanation of what's wrong with the ducts you have.
None of this makes the contractor in front of you a villain. Most local HVAC folks are honest people trying to fix your house before dinner. These questions just make the good ones easy to spot.
Get your estimate
Want a number for your own system? Describe the job in the box below, add a photo of the outdoor unit's label if you have one, and you'll get a free estimate in 2-3 minutes. If it looks right, we'll find you a vetted local HVAC contractor for the work.
Common questions
Should I repair or replace my old R-22 heat pump in Madison?
If it's an R-22 system with a refrigerant leak or a failed compressor, replacement is usually the better money. R-22 is no longer made and recharging is expensive, and the system is likely 20+ years old anyway. A small repair like a capacitor or contactor on an otherwise healthy unit can still make sense for a season while you plan.
Can I get a rebate on a new heat pump in Madison, AL?
Yes, through TVA EnergyRight: $500 for a 15+ SEER2 heat pump or $800 at 17+ SEER2, including dual fuel and mini splits at 17+ SEER2. The installer must be in TVA's Quality Contractor Network and files the claim. The federal tax credit ended for systems installed after 2025.
How long does an HVAC replacement take?
Typically one day for one system, and one to two days for two systems or an attic job. The contractor pulls the permit, and an inspection follows.
Do I have to replace both systems if only one died?
No. Replace the dead one and get a price for the second so you can plan. If both are the same age and on R-22, doing them together saves some cost, but a working system is not an emergency.
Is a heat pump enough for Madison winters?
For most homes, yes, with electric strip heat as backup during cold snaps. If you have gas and want furnace heat in a hard freeze, dual fuel gives you both and still qualifies for the TVA heat pump rebate.
Get the number for your own job
A typical job is a starting point, not your job. Describe yours (a photo helps) and the same estimate engine prices it for Madison in 2-3 minutes. Free, and nobody gets your number.
Sources (16)
- https://energyright.com/?p=28230
- https://homeenergybasics.com/heat-pumps/states/al
- https://tva.com/energy/public-power-partnerships/local-power-companies/lpc/athens-electric-department-city-of
- https://tva.com/energy/public-power-partnerships/local-power-companies/lpc/huntsville-utilities
- https://www.madisonal.gov/640/Permitting
- https://www.madisonal.gov/1119/Inspections
- https://madisoncountyal.gov/home/showpublisheddocument/7374/637455450932730000
- https://www.madisoncountyal.gov/departments/inspection/residential
- https://www.jaspector.com/permits/alabama/limestone/madison/
- https://hacr.alabama.gov/wp-content/uploads/2023/12/2023-Newsletter.pdf
- https://achrnews.com/articles/163729-equipment-prices-keep-rising-as-r-410a-inventory-decreases
- https://www.achrnews.com/articles/164475-honeywell-announces-42-surcharge-on-r-454b
- https://www.achrnews.com/articles/165084-refrigerant-shortage-cools-residential-hvac-sales
- https://homes.rewiringamerica.org/articles/heating-and-cooling/heat-pump-costs
- https://en.wikipedia.org/wiki/Madison,_Alabama
- https://askdoss.com/how-much-does-hvac-installation-cost-in-alabama-in-2026/
Researched for Madison, AL · Updated November 12, 2026 · Reviewed by Ralph Cockburn on November 16, 2026 · How these guides are made
Prices are researched local ranges, not quotes. The contractor who sees your job sets your actual price. More Madison cost guides