Window Replacement Cost in Flower Mound, TX (2026)

The short answer

Replacing every window in a typical Flower Mound two-story brick home (about 24 openings) with low-E vinyl inserts runs roughly $20,000 to $40,000. Most local quotes land around $24,000 to $32,000. That's installed, with removal, haul-off and the Town permit.

Per window, a standard 3x5 single- or double-hung runs about $650 to $1,300 installed. The big two-story family room units and the arched transoms run $1,500 to $4,000 each, which is why two houses with the same window count can get very different quotes. Doing only the worst 8 to 12 windows usually costs $8,000 to $20,000. Fiberglass, composite or wood-clad for the whole house: $45,000 to $100,000 and up.

Everything below explains where your quote sits in those ranges, and why.

Why every window in the house is quitting at once

Flower Mound went from about 15,500 people in 1990 to about 50,700 in 2000 and 64,700 in 2010, per census counts. So most of the houses here were built in the same twenty years, by the same handful of production and semi-custom builders, with the same builder-grade vinyl or aluminum windows. Those windows are now 16 to 35 years old. In North Texas sun, that's about what builder-grade vinyl gets.

You know the symptoms. Fogged glass that won't wipe clean (that's a failed seal, and the gas between the panes is gone). Sashes that stick, won't stay up, or need two hands and a grudge. West-facing rooms you stop using in July.

That's the most common reason people land here, and this guide is built around it. But it works if you came for something else: a few fogged units you want fixed before they spread, a home inspector who flagged the windows before a sale, or hail that cracked some glass. Each of those gets its own section below.

One more thing the age wave tells you: this is a planned, out-of-pocket job for almost everyone here. The Town's own monthly permit reports show about 45 window and door permits a month, steady, year after year. No storm spikes. Just a whole town of windows getting old together.

The family room wall is where the money goes

Walk into most 1990s and 2000s Flower Mound two-stories and there it is: the family room wall of glass. Two stacked picture windows, a pair of arched or half-round transoms on top, maybe another big unit over the front door in the foyer. They're lovely. They are also the expensive lines on your quote.

Three or four of those units at $1,500 to $4,000 each can add $6,000 to $16,000, often a third or more of the whole job. Here's why they cost so much:

  • Size and shape. Arches and half-rounds are custom-built, one at a time. Big picture windows mean big, heavy glass.
  • Access. Units 15 to 20 feet up need a lift outside or staging inside the room. That's more crew, more time, and more setup.
  • Tempered glass. Large low panes and windows near stairs and landings often have to be safety glass under code (more on that below), which costs more per unit.

When you compare quotes, look at these line items first. A quote that's cheap on bedroom windows and vague on the family room wall isn't cheap yet.

For example, based on our estimate engine, replacing all 24 original white vinyl windows in a 1998 two-story, 3,200 sq ft brick house with low-E vinyl inserts, including the two big family room picture windows and the arched transoms, keeping white frames and similar grids, comes to about $12,500 to $23,000. That's below the range above because a plain like-for-like white vinyl swap is the leanest version of this job, and the Dallas cost data behind that range prices a fuller scope.

Insert or full-frame, check before you compare

Almost every house here is brick veneer, and the brick covers the edge of the original window frame. That's why replacement in Flower Mound is nearly always an insert (also called a pocket replacement): the old sashes come out, the old frame stays, and a new, slightly smaller window slides into it. A good crew can set an insert in half an hour or less, per Fine Homebuilding, so a 24-window house typically takes one to three days, with the tall units taking the longest.

Full-frame replacement tears out the whole window down to the studs. On brick, that's a much bigger job: the brick or the trim around it gets in the way, and the opening needs new flashing and careful finishing. It costs noticeably more per opening.

Full-frame is worth it when the frame is rotted, the opening is badly out of square, or water has been getting in. It is not worth it just because a salesperson says it's "the right way." If two quotes are thousands apart, check that they're quoting the same method before you decide anything else. You may be comparing two different jobs.

The tradeoff with inserts: you lose a little glass area, because the new frame sits inside the old one. On the big family room units, ask to see the sightline difference. Most people never notice. Some do.

Vinyl, fiberglass, wood and aluminum in North Texas sun

Vinyl

$650 to $1,300 per standard window installed, $20,000 to $40,000 for the whole house. This is what most Flower Mound homes had and what most go back with. Decent mid-grade vinyl with good low-E glass handles the heat fine; the builder-grade stuff you're replacing lasted 20 to 30 years, and a better unit should do at least that.

When it's wrong: if you want black or bronze frames, vinyl needs a laminated or capped exterior, which costs extra and still doesn't look like painted metal. Same if you want the slimmest possible frames on the two-story glass wall. That's where people start looking at fiberglass.

Fiberglass and composite

Roughly $1,800 to $4,500 per window installed, often $45,000 to $100,000 or more for the whole house, mostly sold through national in-home brands. Stiffer frames, slimmer profiles, better at holding dark colors, longer lead times.

When it's wrong: when you're watching the budget, or when you'll sell in a few years. In the Dallas market, vinyl window replacement gets back about 64% of its cost at resale and wood about 68%, per Remodeling's Cost vs Value report. The premium material doesn't pay back much more. Buy it because you like it, not as an investment.

Wood and wood-clad

Cost vs Value puts a 10-window wood replacement in Dallas at $24,495, about $2,450 per window. Most production homes here never had wood windows, so this is a style upgrade, not a like-for-like swap. Unclad wood on a west or south wall in this sun is asking for maintenance. If you go wood, go clad.

Aluminum

Usually the thing being removed, not installed. Late-1980s and early-1990s homes on the older east side of town still have them. Standard residential aluminum without a thermal break struggles to meet the energy code here, and aluminum lines also took the bigger 2026 price increase. Skip it for a house.

Flower Mound requires replacement windows to meet the Town's adopted energy code. The Town adopted the 2021 IECC, which for this climate zone sets a base maximum of U-0.30 and SHGC 0.25, subject to any local amendments. In plain English: clear glass and basic low-E aren't an option on a permitted job. You need solar-control low-E, the kind that blocks a lot of the sun's heat.

Go one step further and ask for ENERGY STAR South-Central units (U-0.28, SHGC 0.23). Common solar-control coatings meet it, and it typically costs little or nothing extra over code-minimum glass. It also matters for money: Oncor's 2026 efficiency program lists ENERGY STAR windows as an eligible measure for single-family homes, paid through registered participating contractors who pass it on. The amount varies and goes through the contractor, so don't pick a contractor for it alone, but ask whether they participate. (If your electricity comes from CoServ rather than Oncor, ask CoServ what they offer.)

Doing a few windows instead of all of them

Plenty of people here don't do the whole house at once. Going by the Town's permit fees, which are charged per unit, the average window and door permit in Flower Mound covers about 10 to 12 units. Partial jobs are normal.

Replacing 8 to 12 windows typically runs $8,000 to $20,000, depending on how many of them are the big family room units. The usual plans:

  • Failed seals only. Replace the fogged units now, the rest later.
  • West and south first. Those elevations take the afternoon sun and drive your summer cooling bill. Do them first, the shaded side next year.

Downsides: you pay setup and permit costs twice, you lose some of the volume pricing a 24-window order gets, and new units next to old ones can look slightly different. Ask for the whole-house price and the partial price on the same visit, so you know what splitting it actually costs.

Glass-only replacement (swapping just the sealed glass unit and keeping the frame and sash) is the cheapest fix for a fogged window, usually a fraction of a new window. It only makes sense when the frame and sash are in good shape and still operate well. On 25-year-old builder vinyl that sticks and won't stay up, new glass in a tired sash is a short-term patch. Also dig out your paperwork: some window brands carried glass-seal warranties that transfer to new owners.

The permit costs about $100 and it is not optional

Flower Mound requires a permit for every exterior window or door replacement. The Town says so plainly on its permit guidelines. The fee is $40 plus $2.50 per window or door, per the Town's fee schedule, so a 24-window house is $100. Contractors register with the Town for $40; a failed inspection costs $110 to reinspect.

A hundred dollars on a $28,000 job is nothing. The point of the permit is that your new units get checked against the energy code. A contractor who tells you "Flower Mound doesn't need a permit for windows" is wrong, and you should wonder what else they're wrong about. Ask who pulls it (it should be them) and what the inspection involves. Keep a copy; buyers' agents ask.

Why 2026 costs more than the old articles say

Two things changed, and most cost pages haven't caught up.

The federal window tax credit is gone. The IRS says the 25C energy efficient home improvement credit is not allowed for anything placed in service after December 31, 2025. If a quote or website still knocks up to $600 off for "the federal credit," it's out of date. What you're quoted is what you pay.

Window prices went up mid-year. Several big vinyl window manufacturers raised prices 3 to 6% on vinyl and 5 to 8% on aluminum lines effective June 1, 2026, citing PVC, glass, freight and labor. On a $28,000 job, that's roughly a few hundred dollars to over a thousand. A 2025 price page understates what you'll see now.

The good news, such as it is: installation labor here is cheaper than the national average. Construction workers in the Dallas-Fort Worth area average about $26.50 an hour against about $30.70 nationally, per federal wage data, and Dallas window replacement comes in about 10% under the national figure in Cost vs Value. Flower Mound quotes run high because the houses are big and the windows are complicated, not because the crews are expensive.

Hail breaks roofs here, not window budgets

Flower Mound gets real hail. The June 11, 2023 storm dropped stones from 2.5 to over 4 inches across town. Afterward, the Town's permit reports show re-roof permits jumping from about 32 to 46 a month to around 190 to 210 a month that summer and fall. Window and door permits barely moved.

That's useful to know if hail cracked a few of your windows. Texas wind and hail deductibles are often a percentage of your dwelling coverage, and the Texas Department of Insurance shows how a 5% deductible can leave a repair completely unpaid. On a house near the town's median value of about $627,000, even a 1 to 2% deductible can be thousands of dollars, more than many window-only hail repairs. Read your declarations page for the actual number. Window damage is usually worth claiming only alongside a roof claim; if that's where you are, our Flower Mound roof replacement costs guide covers that side.

The small line items that add up

Tempered glass. Under the 2021 building code the Town adopted, safety glass is required in a handful of spots that two-story homes here have plenty of: windows near stairs and landings, windows near tubs and showers with a low bottom edge, windows close to a door, and some large low panes. Expect the foyer, stair-landing and master bath windows to be tempered, at an extra charge per unit. A quote that doesn't mention tempered glass anywhere on a two-story house has either missed it or will add it later.

Lead paint rules. Good news for once. The EPA's lead-safe work rules that add cost to window jobs in older cities apply to homes built before 1978. Flower Mound had about 4,400 residents in 1980. Your house almost certainly isn't one of them, so if someone adds a lead-safe charge, ask why.

Interior trim and paint. Inserts often need new interior stops or trim. Ask whether trim, caulk and paint touch-up are included, or whether you're doing that weekend yourself.

Surprises behind the brick. Sometimes an old window comes out and the sill below it is soft from years of slow leaks. Ask how the contractor handles rot: what they charge per opening to fix it, and that they show you before doing it.

When to schedule it

Window permits in Flower Mound peak April through June (55 to 62 a month in recent years) and dip in winter (as low as about 25 in some months). The swing is mild, but spring is when installers are busiest. Late fall and winter are perfectly fine for installs: each opening is only open for a short while.

Custom-sized units take time to build. Expect several weeks from order to install for local vinyl, longer for national premium brands, and ask for the lead time in writing. If you want the west windows done before next summer, order in winter.

What to ask, and red flags in a quote

Get at least two or three written quotes. Then ask each one:

  1. Insert or full-frame? For every opening. If they recommend full-frame anywhere, why there?
  2. What exact window and glass? Brand, product line, and the glass package. Ask for the U-factor and SHGC, and whether the units are ENERGY STAR South-Central.
  3. How are the family room and arched units priced? Itemized, please. Including the lift or staging.
  4. Which units are tempered? On a two-story, the answer is rarely "none."
  5. Who pulls the Town permit? It should be them, and it should be on the quote.
  6. What's included? Removal, haul-off, interior trim, caulking inside and out, screens, cleanup.
  7. What's the warranty, on what, and from whom? The manufacturer covers the window. Only the installer covers the installation, and that's where leaks come from.

Red flags:

  • "Sign today and it's half off." A price that only exists tonight was never the price. One DFW homeowner reported four quotes for 27 windows ranging from $18,000 to $125,000, with the top one offering a same-day discount. Take the brochure, sleep on it.
  • "No permit needed." Wrong in Flower Mound.
  • A federal tax credit on the quote. It ended after 2025.
  • One lump sum with no unit list. You can't compare it to anything, which is sometimes the point.
  • No mention of glass specs. If they can't tell you the SHGC, they may not know whether it passes code.
  • A big deposit for a standard vinyl order. Some deposit for custom units is normal. Most of the money should come after the work is done.

None of this means the expensive quote is a scam or the cheap one is a bargain. It means you should know exactly what each one is selling before you decide.

Get your estimate

Want a number for your own windows? Describe the job in the box below, add a photo if you have one, and you'll get a free estimate in 2-3 minutes. If it looks right, we'll find you a vetted local window installer for the work.

Common questions

How much does one replacement window cost in Flower Mound?

A standard 3x5 vinyl single- or double-hung with low-E glass typically runs $650 to $1,300 installed. Large picture windows, arched transoms and units on the second floor of a two-story wall run $1,500 to $4,000 each. Ordering one window costs more per unit than ordering twenty, because setup, travel and the permit get spread over fewer windows.

Can I just replace the fogged glass instead of the whole window?

Yes, if the frame and sash are in good shape and the window opens and locks properly. Replacing just the sealed glass unit usually costs a fraction of a new window. If the sash sticks or won't stay up, new glass won't fix that, and you'll likely be replacing the whole window in a few years anyway.

Do I need a permit to replace windows in Flower Mound?

Yes. The Town requires a permit for any exterior window or door replacement, and the new units must meet the adopted energy code. The fee is $40 plus $2.50 per window or door, so about $100 for a 24-window house. Your contractor should pull it.

How long does whole-house window replacement take?

Installation itself is usually one to three days for about 24 inserts, longer if there's a tall family room wall or any full-frame work. The longer wait is ordering: custom-sized units often take several weeks to arrive, and premium brands take longer. Ask for the lead time in writing.

Are new windows worth it before selling?

Sometimes. In the Dallas market, vinyl window replacement recoups about 64% of its cost at resale, so it rarely pays for itself on paper. It does take "fogged windows" off a buyer's inspection report, which can head off a repair request. If you're listing soon, get a price for replacing only the failed units and compare it to the credit a buyer would likely ask for.

Get the number for your own job

A typical job is a starting point, not your job. Describe yours (a photo helps) and the same estimate engine prices it for Flower Mound in 2-3 minutes. Free, and nobody gets your number.

Sources (26)

Researched for Flower Mound, TX · Updated November 19, 2026 · How these guides are made

Prices are researched local ranges, not quotes. The contractor who sees your job sets your actual price. More Flower Mound cost guides