HVAC Replacement Cost in Fishers, IN (2026 Prices)
The short answer
Your house was built around 2002. So was your furnace. So was the AC. One of them is making a noise it didn't used to make, and the other one is the same age, and you've done the math.
Replacing a gas furnace and central AC together in a typical Fishers home (2,400 to 2,800 sq ft, one system, ducts reused) usually runs about $10,000 to $16,000 in 2026. Variable-speed or communicating premium systems land closer to $16,000 to $22,000.
The other common versions of the job, roughly:
- AC only (condenser plus matching coil): about $5,500 to $9,000
- Furnace only: about $4,000 to $7,500, plus roughly $500 to $2,000 if switching from an 80% to a 95% furnace needs new venting or a chimney liner
- Dual fuel (heat pump replaces the AC, gas furnace stays as backup): about $8,000 to $12,000 keeping the old furnace, $13,000 to $20,000 with a new one
- A mini split for one problem room: about $4,000 to $7,000
Same numbers apply whether the AC quit in July, the furnace failed at the first cold snap, or a buyer's inspector just circled "HVAC: 24 years old" in red. The reason you're here changes how much time you have to shop, not what the work costs.
Why half of Fishers is shopping for the same thing
Fishers had about 2,900 homes in 1990. By 2020 it had close to 99,000 people. The median house was built in 2002. That's a whole city of production-built two-stories and ranches that got their furnaces and condensers in the same fifteen-year window, and most of that original equipment is now 15 to 30 years old.
Which means your neighbors are replacing too, and a lot of those houses share the same setup: a builder-grade 80% gas furnace, usually in the basement (sometimes a closet or the garage in slab and crawlspace homes), venting up a metal flue it shares with the water heater, plus a 2.5 to 4 ton AC outside. That shared flue matters more than it sounds. We'll get to it.
What changed in 2026
If a neighbor told you what they paid in 2023, smile, nod, and ignore it. Two things moved since then, and both push the same direction.
The federal tax credit is gone
The 25C energy-efficient home improvement credit, which used to knock up to $2,000 off a heat pump or $600 off a furnace or AC, does not apply to anything installed after December 31, 2025. The IRS says so plainly. Geothermal and solar lost theirs too. Plenty of cost pages (and some sales sheets) still subtract it. If a "net price" in front of you does, it's understated by that amount.
New refrigerant, new prices, and "AC only" now means AC plus coil
New central AC and heat pump systems now use A2L refrigerants (R-454B or R-32) instead of R-410A, and new R-410A system installs were allowed only through the end of 2025. Manufacturers priced the new equipment about 10% higher at the switch, with one major brand saying 15 to 20% over two years, and the coils went up too (ACHR News). Put together, the equipment in a 2026 quote costs roughly 10 to 20% more than the same tonnage did in 2024.
The other consequence: a new A2L condenser needs a matching A2L coil sitting on top of your furnace. So the cheap "just swap the outdoor unit" job mostly doesn't exist anymore. Expect a coil, often line-set work, and on many systems a refrigerant leak sensor tied into the furnace controls. The good news is the 2025 supply crunch on the new refrigerant has largely cleared, so you shouldn't be waiting weeks for parts.
The 80% furnace question
Here's the line item that makes two quotes for "the same job" look thousands apart.
Most original Fishers furnaces are 80% efficient. They vent hot exhaust up a metal flue, usually shared with a gas water heater. A 95% or better furnace is a different animal: it vents cool, wet exhaust through PVC pipe out a side wall or the roof, pulls in combustion air through a second pipe, and needs a condensate drain (sometimes a small pump).
When the furnace leaves the old flue, the water heater is left alone in a chimney that was sized for two appliances. It may not draft properly by itself. CenterPoint's 2026 rebate terms actually require a chimney liner in that situation, plus a flue-closure procedure by the installer. Budget roughly $500 to $2,000 for the venting and liner work on a 80%-to-95% switch, depending on how far the PVC has to run and what the chimney needs. Basement furnaces near an outside wall are the easy case. A closet in the middle of a slab house is not.
So can you just put in another 80%? Yes. An 80% furnace is still legal to install in Indiana in 2026. The federal rule requiring 95% applies to furnaces manufactured after December 2028, and even that is in limbo: the Supreme Court sent the case back in June 2026 and DOE is considering pushing the date to 2030 (Contracting Business). Nobody is selling you an illegal box. But in a heating-dominated climate like central Indiana's, if you're staying ten years, the efficient furnace usually earns its keep, and the 80% gets no utility rebate.
What else moves the price
Labor. Indianapolis-area repair and installation wages sit right about at the national average, per BLS data. Fishers isn't a premium labor market. Differences between quotes here come from scope and equipment more than from hourly rates.
Access. A basement furnace with room around it is a one-day swap for a furnace and AC. A closet furnace with tight clearances, an attic air handler, or a garage install takes longer and can limit which units fit. Dual fuel or a venting conversion can push it to two days.
The line set. The copper lines between the condenser and the coil. Sometimes they can be flushed and reused, sometimes they're the wrong size or buried in a finished basement ceiling. A good contractor tells you which and why. Replacing them through finished drywall adds cost and patching.
Ducts. Every range above assumes your ducts are reused. Many 2000s tract homes have undersized returns, and a new variable-speed system won't perform well against a choked duct system. If a contractor recommends return or duct work, ask them to show you the static pressure reading that justifies it. Real measurement, not vibes.
The bonus room over the garage. If your house has one, you already know it's the hottest room in summer and coldest in winter. A bigger system won't fix that. Options are duct and damper work, zoning, or a mini split for that room (about $4,000 to $7,000 for one zone). Get it priced separately so you can see it.
Permits. Fishers runs its own building department. Under the city's fee schedule, a residential mechanical permit is $75 and each inspection is $75, so a typical changeout carries about $150 to $225 in city fees. Contractors pulling permits in Fishers have to be registered with the city ($100 a year). Expect a permit on a furnace and AC replacement, and ask whether it's in the quote. An uninspected gas appliance swap is exactly the kind of thing that shows up when you sell.
For example, based on our estimate engine, replacing the original 80% basement furnace and 3-ton AC in a 2,600 sq ft, 2002 Fishers two-story with a high-efficiency furnace and a matching AC and coil, reusing the ducts, comes out to about $9,000 to $16,000.
Your equipment options, honestly
Gas furnace, 80% efficient
The cheapest furnace path, because it reuses the existing metal flue and skips the venting work. Lasts 15 to 20 years or more. It's the wrong choice if you're staying 10+ years, or if you want the CenterPoint rebate (which needs 96%). It's a reasonable choice if you're selling soon, or if your furnace sits somewhere that makes PVC venting genuinely hard.
Gas furnace, 95 to 97%+ efficient
More expensive up front, plus the venting and maybe a chimney liner. Cheaper to run every winter, and it qualifies for CenterPoint's rebate ($200 at 96%, $250 at 97%+). Wrong for you if the venting route is ugly and expensive, or you're moving in two years. For most Fishers basements, this is the default for a reason.
Central AC (new A2L refrigerant)
This is what a "new AC" means now, coil included. Aim for at least 15.2 SEER2 if you're on Duke, since that's the bar for their $300 rebate. It's the wrong move to replace only the AC if the furnace is also 20+ years old. Two separate visits, two sets of labor and possibly a coil that has to be redone to match a new furnace later. One matched changeout is usually the better deal.
Heat pump (dual fuel)
In Fishers this usually means a heat pump replaces the AC and the gas furnace stays as backup for the coldest nights. It cools like an AC and heats efficiently in mild weather. Roughly $8,000 to $12,000 if you keep a furnace in good shape, more with a new one. Duke pays $500 on a qualifying heat pump. The catch nobody mentions: CenterPoint's furnace rebate excludes dual-fuel systems unless you also get CenterPoint electric service, and Fishers electricity comes from Duke or NineStar. So dual fuel here trades the $250 gas rebate for the $500 Duke one. It's the wrong choice if lowest upfront cost is the whole goal, unless you qualify for the state rebate below, which changes everything.
Ductless mini split
For the one room the ducts never reached properly: bonus room, sunroom, finished basement, converted garage. Around $4,000 to $7,000 for a single zone. Wrong as a fix for a whole-house system that's simply worn out.
Rebates depend on your electric bill
Fishers gets its gas from CenterPoint (formerly Vectren). Electricity is split between Duke Energy and NineStar Power, and that split decides which rebates you get. Check your electric bill before you do any rebate math.
- CenterPoint, gas furnace: $200 at 96%, $250 at 97%+. Gas has to be your main heat, the install has to fall in calendar 2026, and you apply within 60 days with an itemized invoice. Funds are first come, first served. If your install slips into January, the 2027 terms apply, whatever they turn out to be.
- Duke Energy, if you're a Duke customer: $300 for an AC, $500 for a heat pump (15.2 SEER2, plus 7.5 HSPF2 for heat pumps), installed by a licensed, insured contractor.
- NineStar customers don't get Duke rebates. Call NineStar and ask what it offers before you sign.
So a typical furnace plus AC job in Duke territory gets about $550 back. Nice. Not life-changing. Don't let a salesperson build the whole pitch on it.
The heat pump rebate more Fishers households qualify for
Here's the one people skip, because Hamilton County is supposedly too well off for income-based programs. It isn't, quite.
Indiana's Energy Saver program (the HEAR rebate) covers heat pumps for households at or below 150% of area median income. In Hamilton County the state's 2024 table puts that limit at roughly $121,950 for a family of four ($109,800 for three, $131,750 for five), and the limits are updated each year. Fishers' median household income is about $128,000. So plenty of Fishers households sit near or under the line, and it is worth checking yours.
How much: in the state's program design as other Indiana cities model it, households between 80% and 150% of AMI can get 50% of the heat pump cost up to $8,000, and households at or below 80% (about $65,050 for a family of four here) can get up to the full $8,000. On an $8,000 to $10,000 dual-fuel job, that can mean $4,000 to $5,000 off. It doesn't pay anything toward a furnace and plain AC.
Two things to do before you count on it. Check eligibility and current amounts on the state's Home Energy Rebates page, which sends applications through IndianaEnergySaver.com. And ask the program directly whether swapping your existing AC for a heat pump in a gas-heated home qualifies, before any work starts. Programs like this typically need approval first and won't pay retroactively.
If you do qualify, the usual "heat pumps cost more" logic flips. Get the dual-fuel option priced next to the furnace-plus-AC option and compare the net numbers.
What to ask, and red flags in a quote
Lennox reported that homeowners now collect two or three quotes instead of one or two. Good. Keep doing that. Here's how to read them.
Ask every contractor:
- Did you do a load calculation, or size it from the old unit? A 2002 house with newer windows and insulation may not need the same tonnage the builder picked.
- What's the exact model number for the furnace, the condenser and the coil? You can't compare quotes without it.
- Is the line set being reused or replaced, and why?
- If I'm going from 80% to 95%: where does the PVC exit, where does the condensate go, and what happens to the water heater's venting? Is the chimney liner in the price?
- Is the permit included, and are you registered with the City of Fishers?
- Who registers the equipment warranty? Most brands give longer parts coverage only if the unit is registered within a set window, often 60 to 90 days. And how long is your labor warranty?
- What's the price if I don't use the financing? Promotional financing often has the lender's cost built into the sticker.
Red flags:
- A "net price" that subtracts a federal tax credit for a 2026 install.
- An "AC only" price with no coil listed on a new A2L system.
- An 80%-to-95% furnace quote that says nothing about venting or the water heater.
- No permit, or "we don't need one for a swap."
- A new R-410A system offered as a fresh install in 2026. That window closed at the end of 2025.
- Tonnage picked by eyeballing the old nameplate, and nothing else.
- A price that's only good if you sign today. Furnaces are not concert tickets.
Get your estimate
Want a number for your own system? Describe the job in the box below, add a photo of the furnace and outdoor unit labels if you have one, and you'll get a free estimate in 2-3 minutes. If it looks right, we'll find you a vetted local HVAC contractor for the work.
Common questions
Should I repair my 20-year-old furnace or AC, or replace it?
For a cheap fix (a capacitor, an igniter, a flame sensor) on a system that otherwise works, repair it. Once a major part fails, like a compressor, a heat exchanger or a big refrigerant leak on an R-410A system, replacement usually makes more sense on equipment that old, especially since the furnace and AC tend to go within a few years of each other.
Is it still legal to install an 80% furnace in Fishers?
Yes. The federal 95% minimum applies to furnaces manufactured after December 2028, and that rule is currently in litigation with a possible delay to 2030. An 80% furnace installed in 2026 is legal and repairable. It just gets no CenterPoint rebate and costs more to run every winter.
How long does a furnace and AC replacement take?
Typically one day for a straightforward basement furnace and AC swap, and one to two days if there's venting conversion, a chimney liner or a dual-fuel heat pump. Inspections are scheduled separately with the city.
Can I still get a federal tax credit for a new furnace or heat pump?
No, not for equipment installed in 2026. The 25C credit ended for anything placed in service after December 31, 2025. The money left on the table now is utility rebates and, for income-qualified households, Indiana's heat pump rebate.
Do I need both quotes, heat pump and furnace plus AC?
If your household income may be under the program's limit (roughly $122,000 for a family of four in the state's 2024 table), yes. Indiana's heat pump rebate can cut thousands off a dual-fuel system, which can make it cheaper than the furnace plus AC after rebates. Above that line, the furnace plus AC is usually the lower upfront price.
Get the number for your own job
A typical job is a starting point, not your job. Describe yours (a photo helps) and the same estimate engine prices it for Fishers in 2-3 minutes. Free, and nobody gets your number.
Sources (16)
- https://www.irs.gov/newsroom/faqs-for-modification-of-sections-25c-25d-25e-30c-30d-45l-45w-and-179d-under-public-law-119-21-139-stat-72-july-4-2025-commonly-known-as-the-one-big-beautiful-bill-act-obbb
- https://centerpointenergyindiana-residential-rebate.clearesult.com/gas-furnace-123
- https://centerpointenergyindiana-residential-rebate.clearesult.com/media/wysiwyg/centerpointenergyindiana/0126_CNPIN_RES_2026_6499931_TermsConditions_REBATE_9x7_CLEAN.pdf
- https://www.duke-energy.com/home/products/home-energy-improvement/hvac-replacement
- https://bloomington.in.gov/sites/default/files/2026-02/BGHIP%20Project%20Cost%20Estimate%20Tables%20with%20Rebates%202026.pdf
- https://www.in.gov/oed/grants-and-funding-opportunities/homeowner-incentives
- https://in.gov/oed/files/AMI-tables_-IN24.pdf
- https://codelibrary.amlegal.com/codes/fishers/latest/fishers_in/0-0-0-28728
- https://fishersin.gov/services-resources/resident-resources/new-residents/
- https://census.gov/quickfacts/fact/table/fisherscityindiana/PST045223
- https://www.stats.indiana.edu/c90/towns/towns/fisher29.html
- https://city-Data.com/housing/houses-Fishers-Indiana.html
- https://achrnews.com/articles/163729-equipment-prices-keep-rising-as-r-410a-inventory-decreases
- https://www.achrnews.com/articles/165084-refrigerant-shortage-cools-residential-hvac-sales
- https://www.contractingbusiness.com/industry-news/news/55383087/supreme-court-vacates-ruling-on-95-furnace-efficiency-standard
- https://www.bls.gov/regions/midwest/news-release/2025/occupationalemploymentandwages_indianapolis_20250512.htm
Researched for Fishers, IN · Updated November 12, 2026 · Reviewed by Ralph Cockburn on November 16, 2026 · How these guides are made
Prices are researched local ranges, not quotes. The contractor who sees your job sets your actual price. More Fishers cost guides